Nexus 5k running hsrp....cannot ping between all vlans
I am at a client that I upgrade from running a single 4507 to two Nexus 5548UP switches with two Nexus 2224 fex's connected. The other access layer switches are 2960S switches. I implemented hsrp on the nexus 5k's for redudancy. The issue they are having is that some networks cannot communicate with each other. All user vlans can communicate with the server vlan, but it is not running hsrp on the vlan interface (there is a reason for that, but it not relavent for this issue). The phone vlan, which is running hsrp, can communicate with all networks.
When I am connected to either 5k, they can communicate with all devices on all networks. However, I am on vlan 10, which is a user vlan. I can communicate fine with the server vlan (vlan 101 - not running hsrp) and the phone vlan (vlan 60 - running hsrp). I cannot communicate with vlan 30 or 40, which are both running hsrp. This makes absolutely no sense at all to me. I checked out trunk ports to be sure that vlans are allowed across the networks as well. There are no firewalls between the vlans or ACL's.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.