Hi,
I have mulitiple 5k's in my environment. I am able to remotely login to all except and can't figure out why. All of the neccessary statements are there. The error states: Network error: Software cause connection abort. I am not sure how or if I need to zeroize the cert?
Thanks in advance.
The config is below.
feature telnet
cfs eth distribute
feature interface-vlan
feature lacp
feature vpc
feature lldp
feature fex
username XX password 5 XXXXXXXXXXXXXXXX role network-admin
username XX password 5 XXXXXXXXXXXXXXXX role network-admin
ip domain-lookup
class-map type qos class-fcoe
class-map type queuing class-fcoe
match qos-group 1
class-map type queuing class-all-flood
match qos-group 2
class-map type queuing class-ip-multicast
match qos-group 2
class-map type network-qos class-fcoe
match qos-group 1
class-map type network-qos class-all-flood
match qos-group 2
class-map type network-qos class-ip-multicast
match qos-group 2
fex 120
pinning max-links 4
description "FEX0120"
ntp server 192.168.200.21 prefer use-vrf default
ntp server 192.168.200.22 prefer use-vrf default
vrf context management
vlan 1
vlan 20
name Management
vlan 24,100-103
interface Vlan1
interface Vlan20
no shutdown
description Management/Default VRF
ip address 192.168.200.5/24
!!!
output omitted
!!!
interface mgmt0
line console
line vty
boot kickstart bootflash:/n5000-uk9-kickstart.5.1.3.N1.1a.bin
boot system bootflash:/n5000-uk9.5.1.3.N1.1a.bin
ip route 0.0.0.0/0 192.168.200.1
