08-22-2013 08:02 AM - edited 03-07-2019 03:04 PM
Trying to upgrade my nexus from
n5000-uk9-kickstart.4.2.1.N2.1a.bin to n5000-uk9-kickstart.5.0.3.N1.1c.bin.
I'm not successfuly
xxxxxxxxr# system health check bootflash
Unmount successful...
Fixing any file system errors...failed!
Remounting bootflash ...mount: Success
Failed to mount bootflash
usctcs1-103-23rr#
xxxxxxxr# copy ftp: bootflash:
Enter source filename: n5000-uk9-kickstart.5.0.3.N1.1c.bin
Enter vrf (If no input, current vrf 'default' is considered): management
Enter hostname for the ftp server: 54.23.2.222
Enter username: Manager
Password:
local: /bootflash/n5000-uk9-kickstart.5.0.3.N1.1c.bin: Permission denied
BIOS: version 1.2.0
loader: version N/A
kickstart: version 4.2(1)N2(1a)
system: version 4.2(1)N2(1a)
power-seq: version v1.2
BIOS compile time: 06/19/08
kickstart image file is: bootflash:/n5000-uk9-kickstart.4.2.1.N2.1a.bin
kickstart compile time: 10/1/2010 11:00:00 [10/01/2010 18:32:12]
system image file is: bootflash:/n5000-uk9.4.2.1.N2.1a.bin
system compile time: 10/1/2010 11:00:00 [10/01/2010 19:48:54]
Hardware
cisco Nexus5020 Chassis ("40x10GE/Supervisor")
Intel(R) Celeron(R) M CPU with 2074284 kB of memory.
Processor Board ID JAF1411ALTQ
Device name: usctcs1-103-23rr
bootflash: 0 kB
Usage for bootflash://sup-local
95088640 bytes used
114626560 bytes free
209715200 bytes total
`show inventory`
NAME: "Chassis", DESCR: "Nexus5020 Chassis"
PID: N5K-C5020P-BF , VID: V04 , SN: SSI1352059Q
NAME: "Module 1", DESCR: "40x10GE/Supervisor"
PID: N5K-C5020P-BF , VID: V04 , SN: JAF1411ALTQ
NAME: "Module 2", DESCR: "8x1/2/4G FC Module"
PID: N5K-M1008 , VID: V01 , SN: JAF1409BDSB
NAME: "Fan 1", DESCR: "Chassis fan module"
PID: N5K-C5020-FAN , VID: N/A , SN: N/A
NAME: "Fan 2", DESCR: "Chassis fan module"
PID: N5K-C5020-FAN , VID: N/A , SN: N/A
NAME: "Fan 3", DESCR: "Chassis fan module"
PID: N5K-C5020-FAN , VID: N/A , SN: N/A
NAME: "Fan 4", DESCR: "Chassis fan module"
PID: N5K-C5020-FAN , VID: N/A , SN: N/A
NAME: "Fan 5", DESCR: "Chassis fan module"
PID: N5K-C5020-FAN , VID: N/A , SN: N/A
NAME: "Power supply 1", DESCR: "AC power supply"
PID: N5K-PAC-750W , VID: V01 , SN: DTM140401NU
NAME: "Power supply 2", DESCR: "AC power supply"
PID: N5K-PAC-750W , VID: V01 , SN: DTM140401NV
NAME: "FEX 101 CHASSIS", DESCR: "N2K-C2248TP-1GE CHASSIS"
PID: N2K-C2248TP-1GE , VID: V03 , SN: SSI144401ZJ
NAME: "FEX 101 Module 1", DESCR: "Fabric Extender Module: 48x1GE, 4x10GE Supervisor"
PID: N2K-C2248TP-1GE , VID: V03 , SN: JAF1453AGKN
NAME: "FEX 101 Fan 1", DESCR: "Fabric Extender Fan module"
PID: N2K-C2248-FAN , VID: N/A , SN: N/A
NAME: "FEX 101 Power Supply 1", DESCR: "Fabric Extender AC power supply"
PID: N2200-PAC-400W , VID: V02 , SN: LIT14360HUP
NAME: "FEX 101 Power Supply 2", DESCR: "Fabric Extender AC power supply"
PID: N2200-PAC-400W , VID: V02 , SN: LIT14360HUM
`show diagnostic result module all `
Current bootup diagnostic level: complete
Module 1: 40x10GE/Supervisor SerialNo : JAF1411ALTQ
Overall Diagnostic Result for Module 1 : PASS
Diagnostic level at card bootup: complete
Test results: (. = Pass, F = Fail, I = Incomplete,
U = Untested, A = Abort)
1) TestUSBFlash ------------------------> .
2) TestSPROM ---------------------------> .
3) TestPCIe ----------------------------> .
4) TestLED -----------------------------> .
5) TestOBFL ----------------------------> .
6) TestNVRAM ---------------------------> .
7) TestPowerSupply ---------------------> .
8) TestTemperatureSensor ---------------> .
9) TestFan -----------------------------> .
10) TestVoltage -------------------------> .
11) TestGPIO ----------------------------> .
12) TestInbandPort ----------------------> .
13) TestManagementPort ------------------> .
14) TestMemory --------------------------> .
15) TestFabricEngine :
Eth 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Port ------------------------------------------------------------
. . . . . . . . . . . . . . . . . . . .
Eth 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Port ------------------------------------------------------------
. . . . . . . . . . . . . . . . . . . .
08-22-2013 09:33 AM
Did you try to run this command? show install all failure-reason
08-23-2013 05:36 AM
I'll try that and let you know. Thanks
08-22-2013 03:59 PM
Fixing any file system errors...failed!
Your kickstart file could be corrupt.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: