Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Nexus 7000 blade N7K-M132XP-12 question

On these blades, ports 1,2,9,10,17,18,25 and 26 are listed as performance ports. What does this exactly mean? How are they different from the other ports on this blade and would these be used as ISL ports to a 2nd nexus 7010?

2 REPLIES
New Member

Re: Nexus 7000 blade N7K-M132XP-12 question

Hello Brian

The meaning was that if only these particular (yellow marked 8 out of 32) ports are used they run with wire speed and without oversubscription.

If you use all 32 Ports at the front get a bandwidth of 320Gig and on the backplane only 80 Gig.

hth

Andy

New Member

Re: Nexus 7000 blade N7K-M132XP-12 question

These ports are described in the Nexus 7000 Series NX-OS Interface Configuration Guide:

http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/interfaces/configuration/guide/if_basic.html#wp1838750

1769
Views
0
Helpful
2
Replies
CreatePlease to create content