I have a Nexus 7010 running NX-OS 4.2.2. The issues that I have is with the CMP management port:
During normal operations, I can ssh to the CMP using the same login id and password that I use to login into the switch. According to the guide on CCO,
if you do a reload soft on the switch, which does not reboot the CMP, you should be able to ssh into the CMP with the same login id and password that you use to login to the switch itself. The login id and password are supposed to be synched with the CMP so you can login using the same credentials, even if you reboot the switch. If I reboot the switch I can ssh into the CMP but it would not let me login with the same login id and password that I use to login to the switch. I am supposed to, according to the guide.
Another issue that i have found : according to the guide on CCO, even if the switch is down, so long as you have a power cable connected to the switch, you should be able to ssh to the CMP. The CMP uses a separate bus, software image and auxillary power, indepent of the supervisor engine. Well, I can't do it. When I shut down the switch and my power cables are still connected, everything is dead. The LED lights on the CMP are all out. Am I missing something or reading something wrong here?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.