cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3703
Views
5
Helpful
3
Replies

nexus 7000 route redistribution

whanson
Level 2
Level 2

                   CAn anyone tell me why I am getting this attempting to redistribute bgp into ospf

router ospf 10
  router-id 11.11.11.11
  redistribute bgp 65019 route-map test


ospf: 10 [3710] (default) Processing external redistributed route 151.151.151.151/32
ospf: 10 [3710] (default)   redist default_metric is 1
ospf: 10 [3710] (default)     Redistribution policy match NOT setting the: is_l3vpn flag
ospf: 10 [3710] (default)     Redistribution policy match failed
ospf: 10 [3710] (default) Flushing ext route 151.151.151.151/32
ospf: 10 [3710] (default) Flushing NSSA route 151.151.151.151/32

the route-map simply allows   0.0.0.0/0

thx again

3 Replies 3

andrew.prince
Level 10
Level 10

Post all of the relevant config

Sent from Cisco Technical Support iPad App

I found the answer though not sure I understand the logic of it...thx

In a non-MPLS VPN scenario, iBGP is not redistributed to IGP by default.

In an MPLS VPN scenario (route distinguisher configured under a VRF), iBGP is redistributed to IGP by default.

You can use route maps to override the default behavior in both scenarios, but be careful when doing so as incorrect use of route maps can result in network loops. The following examples show how to use route maps to change the default behavior.

You can chnage the default behavior for scenario 1 by modifying the route map as follows:

route-map foo permit 10 

   match route-type internal 

router ospf 1 

   redistribute bgp 100 route-map foo 

This obscure "match route-type internal" fixed a redisitribution issue between BGP and OSPF in one of our Nexus.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card