I would like to obtain the show run output in XML. We are running Nexus 7010 version 6.1(4). After multiple reaches, I found out that we need to load the xsd file to the bootflash. So, I've downloaded the n7000_xsd.6.2.6.tar.gz file from the Cisco web site. My question is:
Do I need to unzip the file before it can be accessed?
How do I active the xsd file from the bootflash?
How can I get the running configuration in XML format?
FYI, show ip arp | xml is working fine but show run | xml is still giving me the output in text format. Your help is greatly appreciated.
Yes i am observing the same behaviour in my lab. There is already an enhancement bug in place for this issue. you cannot have any show run command in XML format For Eg: show run ip | xml, everything would be in normal CLI format. At this point this is not fixed. tentative dates are not known.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.