Just installing my first Nexus 7009, come across a minor problem when trying to telnet from the Nexus
can ping a hostname ok but can't telnet hostname, but ok if I use the IP address , see output below
ping Hostname Using IP address of interface loopback0 Using IP address of interface loopback0 Using IP address of interface loopback0 PING Hostname.xxxx.com.au (172.17.140.1): 56 data bytes 64 bytes from 172.17.140.1: icmp_seq=0 ttl=250 time=23.185 ms 64 bytes from 172.17.140.1: icmp_seq=1 ttl=250 time=23.196 ms 64 bytes from 172.17.140.1: icmp_seq=2 ttl=250 time=23.106 ms 64 bytes from 172.17.140.1: icmp_seq=3 ttl=250 time=23.018 ms 64 bytes from 172.17.140.1: icmp_seq=4 ttl=250 time=23.086 ms
--- Hostname.xxxx.com.au ping statistics --- 5 packets transmitted, 5 packets received, 0.00% packet loss round-trip min/avg/max = 23.018/23.118/23.196 ms
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...