I am hoping someone can share their experience and configuration best practices with the Nexus 7k platform in a data center/campus environment. I currently have a hybrid 6509 with MSFC2, running EIGRP at the data center. I am looking into replacing the 6509 with a pair of Nexus 7010 and I am looking for configuration best practices, like configuring routing, VTP, QoS, Spanning Tree, vPC, .... etc..
Thanks in advance !! I appreciate any inputs/suggestions !!!
I've never work with NX-OS before, so this will be something new for me to learn. I would like to find out what other people are doing out there when migrating from 6500 series switches to Nexus and what to aviod. I will read up the links you sent.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...