Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Nexus 7k upgrade failure

I've been trying to upgrade out 7k to 5.1.3 via ISSU and keep running into failures.  Does anyone know where I can look up the error code listed below?

Notifying services about system upgrade.

[#                   ]   0% -- FAIL. Return code 0x40B30029 (Operation failed. Fabric is already locked).

Pre-Upgrade check failed. Return code 0x40B30029 (Operation failed. Fabric is already locked).

n7k-1# install all kickstart bootflash:n7000-s1-kickstart.5.1.3.bin system bootflash:n7000-s1-dk9.5.1.3.bin

Verifying image bootflash:/n7000-s1-kickstart.5.1.3.bin for boot variable "kickstart".

[####################] 100% -- SUCCESS

Verifying image bootflash:/n7000-s1-dk9.5.1.3.bin for boot variable "system".

[####################] 100% -- SUCCESS

Verifying image type.

[####################] 100% -- SUCCESS

Extracting "lc-f1-n7k" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.

[####################] 100% -- SUCCESS

Extracting "bios" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.

[####################] 100% -- SUCCESS

Extracting "lc-m1-n7k" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.

[####################] 100% -- SUCCESS

Extracting "system" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.

[####################] 100% -- SUCCESS

Extracting "kickstart" version from image bootflash:/n7000-s1-kickstart.5.1.3.bin.

[####################] 100% -- SUCCESS

Extracting "lc-m1-n7k" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.

[####################] 100% -- SUCCESS

Extracting "lc-f1-n7k" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.

[####################] 100% -- SUCCESS

Extracting "cmp" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.

[####################] 100% -- SUCCESS

Extracting "cmp-bios" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.

[####################] 100% -- SUCCESS

Performing module support checks.

[####################] 100% -- SUCCESS

Notifying services about system upgrade.

[#                   ]   0% -- FAIL. Return code 0x40B30029 (Operation failed. Fabric is already locked).

Pre-Upgrade check failed. Return code 0x40B30029 (Operation failed. Fabric is already locked).

n7k-1# sh ver

Cisco Nexus Operating System (NX-OS) Software

TAC support: http://www.cisco.com/tac

Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie

s_home.html

Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained in this software are

owned by other third parties and used and distributed under

license. Certain components of this software are licensed under

the GNU General Public License (GPL) version 2.0 or the GNU

Lesser General Public License (LGPL) Version 2.1. A copy of each

such license is available at

http://www.opensource.org/licenses/gpl-2.0.php and

http://www.opensource.org/licenses/lgpl-2.1.php

Software

  BIOS:      version 3.22.0

  kickstart: version 5.1(2)

  system:    version 5.1(2)

  BIOS compile time:       02/20/10

  kickstart image file is: bootflash:///n7000-s1-kickstart.5.1.2.bin

  kickstart compile time:  12/25/2020 12:00:00 [12/18/2010 03:55:20]

  system image file is:    bootflash:///n7000-s1-dk9.5.1.2.bin

  system compile time:     11/29/2010 12:00:00 [12/18/2010 05:02:00]

Hardware

  cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor module-1X")

  Intel(R) Xeon(R) CPU         with 8260944 kB of memory.

  Processor Board ID JAF1507CCSH

  Device name: n7k-1

  bootflash:    2029608 kB

  slot0:              0 kB (expansion flash)

Kernel uptime is 25 day(s), 22 hour(s), 39 minute(s), 17 second(s)

Last reset

  Reason: Unknown

  System version: 5.1(2)

  Service:

plugin

  Core Plugin, Ethernet Plugin

CMP (Module 5) ok

CMP Software

  CMP BIOS version:        02.01.05

  CMP Image version:       5.1(1) [build 5.0(0.66)]

  CMP BIOS compile time:   8/ 4/2008 19:39:40

  CMP Image compile time:  11/29/2010 12:00:00

CMP (Module 6) ok

CMP Software

  CMP BIOS version:        02.01.05

  CMP Image version:       5.1(1) [build 5.0(0.66)]

  CMP BIOS compile time:   8/ 4/2008 19:39:40

  CMP Image compile time:  11/29/2010 12:00:00

n7k-1# dir flash:

No such file or directory

n7k-1# dir

        279    Mar 04 11:53:36 2011  JAF1443BPAJ_155080054.lic

  146170914    Mar 04 11:52:23 2011  n7000-s1-dk9.5.1.2.bin

  146701191    Nov 08 13:54:42 2011  n7000-s1-dk9.5.1.3.bin

  146258490    Nov 05 23:40:49 2011  n7000-s1-dk9.5.1.5.bin

   30687232    Mar 04 11:51:32 2011  n7000-s1-kickstart.5.1.2.bin

   30674944    Nov 08 13:56:01 2011  n7000-s1-kickstart.5.1.3.bin

   30515200    Nov 05 23:38:27 2011  n7000-s1-kickstart.5.1.5.bin

       4096    Nov 02 11:31:34 2011  vdc_2/

       4096    Mar 04 12:37:32 2011  vdc_3/

       4096    Mar 04 12:37:32 2011  vdc_4/

      13284    Nov 02 13:11:12 2011  vlan.dat

Usage for bootflash://

  658649088 bytes used

1180209152 bytes free

1838858240 bytes total

3 REPLIES
Community Member

Nexus 7k upgrade failure

Can you issue the following command to see what or who has a lock.

show cfs lock

Once you know what has the lock you should be able to clear it.

Community Member

How do we clear the lock once

How do we clear the lock once we know who has the lock?

 

Community Member

"clear ntp session" cleared

"clear ntp session" cleared the lock.

 

3032
Views
0
Helpful
3
Replies
CreatePlease to create content