Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Nexus 7K vPC and VRRP

Hi All,

anyone knows if VRRP is supported in two addresses way with vPC configuration?

On Cisco Site i can see VRRP/vPC support but with this configuration (apart subnet errors...)


http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/unicast/configuration/guide/l3_vrrp.html#wp1129244

The Point is that i wanna use same address for virtual and one phy (one RFC_3768 way)

CISCO EXAMPLE
RouterA
interface ethernet 1/0
ip address 10.1.0.2/16
no shutdown
vrrp 1
priority 120
authentication text cisco
advertisement-interval 3
address 10.1.0.10
no shutdown

RouterB
interface ethernet 1/0
ip address 10.1.0.1/16
no shutdown
vrrp 1
priority 100
authentication text cisco
advertisement-interval 3
address 10.2.0.10
no shutdown

INSTEAD I WANNA CONFIGURE

RouterA
interface ethernet 1/0
ip address 10.1.0.2/16
no shutdown
vrrp 1
priority 120
authentication text cisco
advertisement-interval 3
address 10.1.0.2
no shutdown


RouterB
interface ethernet 1/0
ip address 10.1.0.1/16
no shutdown
vrrp 1
priority 100
authentication text cisco
advertisement-interval 3
address 10.1.0.2
no shutdown

tnx a lot

Dan

1 REPLY
Cisco Employee

Re: Nexus 7K vPC and VRRP

Hi Dan,

Your configure should be OK.

Regards,

Jack

1351
Views
5
Helpful
1
Replies