We are replacing all of the switches in the network with two Nexus 93128 switches. We have 4 VLANS and need to add security between the MGNT VLAN, IIS Server VLAN, application VLAN and DB VLAN. This is all internal use, no external users. The problem is that they all need access to the internet for updates and call home to an outside vendor for monitoring.
Should I put ACL's at the switch level or route everything back to the ASA5520 for security and routing.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...