hello ,
I was trying to add vlan to existing trunk port on nexus 7K with 5.0(2a) image .
On perticular VDC . current configration is
interface Ethernet8/21
switchport
switchport mode trunk
switchport trunk allowed vlan 1111,1128
channel-group 6 mode passive
no shutdown
When I am doing command to add another vlan it doesnt give right syntax ,
# switchport tr?
^
% Invalid command at '^' marker.
I was trying to use command "switchport trunk add vlan 20" please advise .
thanks for help
Regards
Amit