Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

nexus &k no switchport trunk command

hello ,

I was trying to add vlan to existing trunk port on nexus 7K with 5.0(2a) image .

On perticular VDC . current configration is

interface Ethernet8/21

  switchport

  switchport mode trunk

  switchport trunk allowed vlan 1111,1128

  channel-group 6 mode passive

  no shutdown

When I am doing command to add another vlan it doesnt give right syntax ,

# switchport tr?

                                              ^

% Invalid command at '^' marker.

I was trying to use command "switchport trunk add vlan 20"  please advise .

thanks for help

Regards

Amit

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

nexus &k no switchport trunk command

Hi,

Try adding it to  po6

int po6

switch trunk....

HTH

1 REPLY
VIP Super Bronze

nexus &k no switchport trunk command

Hi,

Try adding it to  po6

int po6

switch trunk....

HTH

142
Views
5
Helpful
1
Replies