07-10-2013 04:55 PM - edited 03-07-2019 02:20 PM
Hi,
Anyone know the equivalent command for switchport protected on a Nexus 7K?
Thanks
Solved! Go to Solution.
07-10-2013 05:22 PM
Muca,
On Nexus its supported in this way :
Here is the description and here is the web site for supported features.
http://www.cisco.com/cdc_content_elements/flash/dataCenter/ciscofeaturen
avigator/index.html
To protect the content-addressable memory(CAM) tables from attacks
(flooding, MAC address spoofing), Cisco NX-OS 4.0 supports port security
to limit the port ingress traffic.You can use port security with
dynamically learned and static MAC addresses to restrict a port's
ingress traffic by limiting the MAC addresses that are allowed to send
traffic into the port.
HTH
Regards
Inayath
07-10-2013 05:22 PM
Muca,
On Nexus its supported in this way :
Here is the description and here is the web site for supported features.
http://www.cisco.com/cdc_content_elements/flash/dataCenter/ciscofeaturen
avigator/index.html
To protect the content-addressable memory(CAM) tables from attacks
(flooding, MAC address spoofing), Cisco NX-OS 4.0 supports port security
to limit the port ingress traffic.You can use port security with
dynamically learned and static MAC addresses to restrict a port's
ingress traffic by limiting the MAC addresses that are allowed to send
traffic into the port.
HTH
Regards
Inayath
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide