Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Nexus - "Switchport protected"

Hi,

Anyone know the equivalent command for switchport protected on a Nexus 7K?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Nexus - "Switchport protected"


Muca,

On Nexus its supported in this way :

Here is the description and here is the web site for supported features.

http://www.cisco.com/cdc_content_elements/flash/dataCenter/ciscofeaturen

avigator/index.html

To protect the content-addressable memory(CAM) tables from attacks

(flooding, MAC address spoofing), Cisco NX-OS 4.0 supports port security

to limit the port ingress traffic.You can use port security with

dynamically learned and static MAC addresses to restrict a port's

ingress traffic by limiting the MAC addresses that are allowed to send

traffic into the port.

http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_portsec.html

HTH

Regards

Inayath

1 REPLY
Cisco Employee

Nexus - "Switchport protected"


Muca,

On Nexus its supported in this way :

Here is the description and here is the web site for supported features.

http://www.cisco.com/cdc_content_elements/flash/dataCenter/ciscofeaturen

avigator/index.html

To protect the content-addressable memory(CAM) tables from attacks

(flooding, MAC address spoofing), Cisco NX-OS 4.0 supports port security

to limit the port ingress traffic.You can use port security with

dynamically learned and static MAC addresses to restrict a port's

ingress traffic by limiting the MAC addresses that are allowed to send

traffic into the port.

http://www.cisco.com/en/US/docs/switches/datacenter/sw/4_1/nx-os/security/configuration/guide/sec_portsec.html

HTH

Regards

Inayath

632
Views
0
Helpful
1
Replies
CreatePlease to create content