I'm having problems getting our Nexus 7000 to authenticate users from our Windows domain. If I set up a user within the ACS server and use the CiscoSecure database for password authentication it works fine.
In the logs on the nexus I receive the following messages when logging on using my windows account.
%AUTHPRIV-3-SYSTEM_MSG: Unable to create temporary user 16894. Error 0x404a0036 - login
%AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication failed for user 16894 from 10.128.45.44 - login
We can log on to all other Cisco OS devices using windows domain accounts, its just the Nexus.
Thanks for letting me know, I've spent ages trying to figure this out. Do you know of any way around this? I was planing to upgrade the NX-IOS to version 4.2.4 to but I presume this won't make any difference?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...