Nexus vPC load-balancing

[jeppe]

We are having some issues with vPC load-balancing on our Nexus 5000 switches. The vPC consists of 1 interface on each 5000, but we are only seeing traffic sourced from nexus on one of the interfaces

Return traffic from our blade switches are utilizing both links.

part of running-config:

port-channel load-balance ethernet source-dest-ip invalid-hash

vpc domain 1

     peer-kepalive destination <snip>

interface port-channel 1

     switchport mode trunk

     vpc peer-link

     switchport trunk allowed vlan 1-90,92-4093

     spanning-tree port type network

interface port-channel 2

     switchport mode trunk

     vpc 2

we have 1 interface assigned to each channel-group. we have tested both lacp and static mode. Anyone else seen this type of behaviour?

-Jeppe

[Marcel Zehnder]

Hello

Could you post some kind of network diagram? If I get you right the problem only occurs in the direction N5k --> Blade Switches: Maybe there's a problem one layer above (rest of LAN ---> N5k), like traffic is arriving only on one of your two N5k's?

-Marcel