One of our enclosures lost one of it's backup links to a Nexus5548. Looking at the interfaces the status reads "faulty". The interface in question is Eth1/5, but what I also noticed there were a couple interfaces not in use w/ the same status. I tried switching out the gbic and disabling/enabling the interface, but nothing helped. Any thoughts? Is a reboot my only option?
<code>
switch# show int status
--------------------------------------------------------------------------------
Port Name Status Vlan Duplex Speed Type
--------------------------------------------------------------------------------
Eth1/1 -- connected 226 full 10G 10Gbase-SR
Eth1/2 -- connected 226 full 10G 10Gbase-SR
Eth1/3 -- connected trunk full 10G 10Gbase-SR
Eth1/4 -- faulty 1 full 10G --
Eth1/5 -- faulty trunk full 10G 10Gbase-SR
Eth1/6 -- connected trunk full 10G 10Gbase-SR
Eth1/7 -- notconnec trunk full 10G 10Gbase-SR
Eth1/8 -- connected trunk full 10G 10Gbase-SR
Eth1/9 -- notconnec 1 full 10G 10Gbase-SR
Eth1/10 -- notconnec 1 full 10G 10Gbase-SR
Eth1/11 -- faulty 1 full 10G --
Eth1/12 -- connected trunk full 10G 10Gbase-SR
Eth1/13 -- faulty 1 full 10G --
Eth1/14 -- connected trunk full 10G 10Gbase-SR
Eth1/15 -- sfpAbsent 1 full 10G --
Eth1/16 -- connected trunk full 10G 10Gbase-SR
Eth1/17 -- sfpAbsent 1 full 10G --
Eth1/18 -- sfpAbsent 1 full 10G --
Eth1/19 -- sfpAbsent 1 full 10G --
Eth1/20 -- sfpAbsent 1 full 10G --
Eth1/21 -- sfpAbsent 1 full 10G --
Eth1/22 -- sfpAbsent 1 full 10G --
Eth1/23 -- sfpAbsent 1 full 10G --
Eth1/24 -- sfpAbsent 1 full 10G --
Eth1/25 -- sfpAbsent 1 full 10G --
Eth1/26 -- sfpAbsent 1 full 10G --
Eth1/27 -- sfpAbsent 1 full 10G --
Eth1/28 -- sfpAbsent 1 full 10G --
Eth1/29 -- sfpAbsent 1 full 10G --
Eth1/30 -- faulty 1 full 10G --
Eth1/31 -- connected trunk full 10G 10Gbase-LR
Eth1/32 -- connected trunk full 10G 10Gbase-SR
switch# -- notconnec routed auto auto --
</code>
