Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Nexus5K cannot use vrf for snmp server host

Helllo,

I'm trying to configure Nexus 5K to use vrf for snmp-server host, however hit the following error:

switch(config)# snmp-server host 10.1.1.111 traps version 2c public  udp-port 1163

switch(config)# snmp-server host 10.1.1.111 use-vrf management

No such SNMP Target configured.

When I use dummy ip, let say 1.1.1.1 I can successfully configure the above lines with no errors.

Any pointers why "use-vrf" is rejected?

Thanks

Everyone's tags (1)
2 REPLIES
New Member

I am having the exact same

I am having the exact same issue. Osimonov1 have you found any solution to that? 

New Member

Probably you call for using

Probably you call for using some kind of udp port in your already configured snmp-server host command: snmp-server host x.x.x.x traps version 2c <key> udp-port xx

When you want to assign this snmp-server host to vrf management you have to include those ports in your command: snmp-server host x.x.x.x use-vrf management udp-port xx

616
Views
0
Helpful
2
Replies
CreatePlease login to create content