01-02-2014 02:05 PM - edited 03-07-2019 05:21 PM
Hello
Refer to the Attatched Drawing to Get More info about the Design
i have one server 2 NIC having one IP using Windwos Server 2012 NIC Teaming IP 172.16.1.10
connected them to 2 Seprated SW WS-C2960-24TC-L
both SWs are Connected to L3 SW & ISP
to allow the Server to Reach the Internet i have to Shutdwon of the 2 SW or configure one of the NICs to be Stand by and the Other One is Acive
any idea and i need to know Why ??/
Thank you
01-02-2014 02:30 PM
Hi,
NIC teaming will not work since the 2960 switches are not stacked. If your switches are 2960s, they are stackable. Once the switches are stacked, NIC team will work.
HTH
01-02-2014 02:51 PM
hi
yes i know that but what is the main reason for that is it for mac address or something eles
i tested with Dual WS-4948-S and it Work Fine 2 Active NICs
01-03-2014 01:48 AM
Hi Ahmad,
I dont think this will work with low end switch.if you feel problem with failover....you can try this with two switches.
http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a008089a821.shtml
Regards,
Satya.M
(Plz rate if helps)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: