Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NM-16ESW Solution

Need to find out if this solution will work.

I want to install a NM-16ESW into a 2811 ISR. I would like to configure 16 individual VLAN interfaces and assign each physical port to one of the VLANs.

Will the router/module support that number of VLANs? Each VLAN interface will have it's own IP address in a separate network. Will I be able to successfully route between all of the different subnets using EIGRP?

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: NM-16ESW Solution

You can configure up to 256 Vlans. Your proposed design will work.

HTH,

__

Edison.

2 REPLIES
Hall of Fame Super Bronze

Re: NM-16ESW Solution

You can configure up to 256 Vlans. Your proposed design will work.

HTH,

__

Edison.

New Member

Re: NM-16ESW Solution

Acknowledged. Thanks for the reply.

222
Views
0
Helpful
2
Replies