Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

NM-8CE1T1-PRI configuration

Hi,

I know that NM-8CE1T1-PRI card can support only 128 channels. Could any one confirm whether it supports clear channel configuration.

If I configure 4 ports as channelised E1 making use of 128 channels, can I configure remaining 4 ports as clear channel supporting 2 Mbps. ?

Please provide the configuration for clear channel.

Please provide a documenation for NM-8CE1T1-PRI configuration.

Thanks,

1 REPLY
Silver

Re: NM-8CE1T1-PRI configuration

Cisco 8-Port Channelized T1/E1 and ISDN PRI High Speed WAN Network Module

- Part number: NM-8CE1T1-PRI

- Provides channelized T1 or E1 connections or ISDN PRI connections

- Supported on Cisco 3800 series routers

-- Remote Management over

This channelized network module provides T1/E1 and ISDN support. It has 128 channels.

The T1/E1 HWICs or network module will not be operational until a card type is configured.

1. enable

2. configure terminal

3. card type {t1 | e1} slot subslot

For further information click this link.

http://www.cisco.com/en/US/docs/ios/12_4/12_4x/12_4_11xw/fmt1e1ic.html#wp1054923

2057
Views
0
Helpful
1
Replies