03-28-2009 09:39 AM - edited 03-06-2019 04:52 AM
After upgrading a test swicth C2960-48TC-L from 12.2(46)SE to 12.2(50)SE I do have no port status anymore in the CISCO Network Assistent. All port are marked blue.
Here are the slices of my running config:
version 12.2
no service pad
service timestamps debug uptime
service timestamps log datetime
service password-encryption
service sequence-numbers
aaa new-model
!
!
aaa authentication login default local
aaa authorization exec default local
aaa authorization network default local
!
!
!
aaa session-id common
crypto pki trustpoint HTTPS_SS_CERT_KEYPAIR
enrollment selfsigned
serial-number
revocation-check none
rsakeypair HTTPS_SS_CERT_KEYPAIR
!
!
crypto pki certificate chain HTTPS_SS_CERT_KEYPAIR
certificate self-signed 01
ip default-gateway uuu.vvv.www.xxx
ip http server
ip http authentication local
ip http secure-server
!
control-plane
!
!
line con 0
line vty 0 4
password 7 xxxxxxxxxxxxxxxxxxxx
length 0
transport input ssh
line vty 5 15
password 7 xxxxxxxxxxxxxxxxxxxx
transport input ssh
03-28-2009 11:03 AM
Hi,
Do you have any special or extra feature requirement which Old IoS was not suporting and you decided for IoS upgradation.
Simply, asking for better understanding.
Jimmy
03-29-2009 04:24 AM
Hi,
The only reason for planning the upgrade is the security issues that are solved in 12.2(50)SE.
Roland
04-22-2009 08:20 AM
No, I was forced by some security issues which are solved in IOS 12.2(50).
Roland
04-22-2009 06:04 AM
Did you already find a solution for this phenomenon? We have the same problem on multiple switches 2960, 3750 but for some reason not on the 3560
04-22-2009 08:17 AM
Pity wise not. I do have this incident only on the 2960 and NOT on my 3750.
Mayby I spend some hours by playing around with the aaa-new-model & the ip http authentication config in my testlab.
04-22-2009 02:51 PM
Try using the 12.2(50)SE1 instead of the SE.
04-23-2009 12:21 AM
That I did already. Same result as before.
04-23-2009 02:23 PM
And the Cisco Network Assistant is the latest version?
04-23-2009 03:46 PM
YES; It is CNA 5.4.
04-27-2009 01:56 PM
I'm having the same problem. All ports on the switches are blue except for our 3750s. I upgraded from 122(25)SEE3/4 to 122(50)SE. Did you end up finding a fix for this issue?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: