Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

no track rtr command anymore

I want to make use of ip sla, but the "track 100 rtr 1 ..." command fails

example:

ip sla 1

icmp-echo 10.1.1.1 source-interface FastEthernet0

timeout 10000

threshold 2

frequency 15

ip sla schedule 1 life forever start-time now

ip sla 2....

track 100 rtr 1 reachability

^

track 200 rtr 2 reachability

^

it places the dreaded carrot on the rtr keyword.

I am running ip-base 12.4.11 t1 on a 3745.

Do I have to move up to advanced ip or enterprise for this feature.

I want to be able to use tracking ip sla for ip next-hop verify-availability 10.1.1.1 10 track 100

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: no track rtr command anymore

This command is not supported in IP-Base nor Advanced IP, you will have to upgarde to a higher feature set..

Enterprise base will do..

12.4(11)T1 c3745-entbasek9-mz.12.4-11.T1

2 REPLIES
New Member

Re: no track rtr command anymore

This command is not supported in IP-Base nor Advanced IP, you will have to upgarde to a higher feature set..

Enterprise base will do..

12.4(11)T1 c3745-entbasek9-mz.12.4-11.T1

Re: no track rtr command anymore

If the non crypto images will work, I am home free. Otherwise, I will have to get some more flash

628
Views
0
Helpful
2
Replies
CreatePlease login to create content