Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Non IOS 65xx cannot recognize WS-X6608-E1

We had this card (WS-X6608-E1) working fine with CatOS, after upgrading this Switch to IOS, modules on slot appears power down:

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

6 8 E1 WS-X6608-E1 SAD062103SG

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

6 0002.fce1.cd0e to 0002.fce1.cd15 1.3 Unknown Unknown PwrDown

We are using IOS (tm) s222_rp Software (s222_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF4, and have tried others but problem persist.

Is this module still supported because there is no Cisco documents related or is a Boot/firmware issue.

Regards.

1 REPLY
Silver

Re: Non IOS 65xx cannot recognize WS-X6608-E1

Hi ,

6608-T1 and 6608-E1 line cards are not supported in IOS mode.See the release notes for latest IOS Sw releases:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.ht

m#wp314139

Hope it helps you.

Thanks,

satish

213
Views
0
Helpful
1
Replies
CreatePlease login to create content