Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Novell & VLANs

What needs to be open to allow Zenworks 10 ZZM Configuration Manager and eDirectory Open Enterprise Server to operate and manage devices properly across VLANs?

Setup

Basic Network VLAN 10 / everything currently on servers (Novell) and computer network.

Server VLAN 20 - Win2k3 DHCP & WINS

Test Lab 30 - Computers and Printers.

The Novell manager is getting an error "Unable to connect the IP address or hostname" when trying to connect to computers across the VLAN. Everything that on VLAN 10 can talk. But everything on VLAN 30 is getting the error.

On VLAN 30, I have IP helper-address for; DHCP, DNS1, DNS2, PXEBoot and Novell Server.

I havent seen any thing novell's forums about this issue.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: Novell & VLANs

Can you ping the destination address from the 'Novell Manager'? If so, routing is working and unless you have some kind of filtering between Vlans, the connection should work. If it doesn't, you should look into the application itself within Novell.

HTH,

__

Edison.

2 REPLIES
Hall of Fame Super Bronze

Re: Novell & VLANs

Can you ping the destination address from the 'Novell Manager'? If so, routing is working and unless you have some kind of filtering between Vlans, the connection should work. If it doesn't, you should look into the application itself within Novell.

HTH,

__

Edison.

Community Member

Re: Novell & VLANs

Yes, I can ping from the Novell Manager.

I thought so but just wanted to double check with someone.

Thank You.

116
Views
0
Helpful
2
Replies
CreatePlease to create content