Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NSF in an EIGRP network.

I have a 6509 that I am installing a redundant 720 Supervisor module. EIGRP is the routing protocol used between my layer 3 devices. The other 3 devices are 3750s running 12.2(25)SEE IOS. Currently this IOS does not support NSF. Which IOS should I use on my neigboring 3750s in order to make sure stateful switchover occurs in the case that my active Supervisor module fails?

2 REPLIES
Silver

Re: NSF in an EIGRP network.

Go to this URL:

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

It is Cisco's feature navigator and from there you can input the NSF feature for EIGRP and get all the IOS levels and for what platforms you need...Good Luck..Pls rate..

Bronze

Re: NSF in an EIGRP network.

NSF was introduced in 12.2(25)SEC so the problem is actually the lack of NSF support in your feature set. You need at least IP Services to get NSF awareness. GL!

235
Views
5
Helpful
2
Replies