Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

ntp clock period configuration

hi,

can someone give me a link or on how to configure ntp clock <period>. do we calculate for it or is it there a default?

Router(config)#ntp clock ?

<0-4294967295> Clock period in 2^-32 seconds

1 ACCEPTED SOLUTION

Accepted Solutions

Re: ntp clock period configuration

John,

There is no need co configure the NTP clock period. It is not recommended to set the clock period as the defaults will work just fine. Please see the following links.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a0080093f16.shtml#qa3

and

http://www.cisco.com/en/US/docs/ios/12_1/configfun/command/reference/frd3003.html#wp1018798

HTH,

Mark

1 REPLY

Re: ntp clock period configuration

John,

There is no need co configure the NTP clock period. It is not recommended to set the clock period as the defaults will work just fine. Please see the following links.

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a0080093f16.shtml#qa3

and

http://www.cisco.com/en/US/docs/ios/12_1/configfun/command/reference/frd3003.html#wp1018798

HTH,

Mark

13322
Views
5
Helpful
1
Replies
CreatePlease to create content