NTP source command disappears after reload!

[weymannpe]

Hi all,

I have a weird problem when specifying the ntp source interface. The command disappears after a relaod! The funny thing is that, when I specify the source interface with the ntp server togther "ntp server a.b.c.d source <interface>" the complete line is missing after a relaod.

I figured that problem out on a Cisco 876 with 12.4(24)T Advanced Enterprise.

If you have any ideas, pleas let me know.

Best regards,

Peter

[Edison Ortiz · Accepted solution]

It sounds like you are hitting this bug:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsx21595

HTH,

__

Edison.

[weymannpe]

You are right!

Thank You very much!

Peter

[Tsasbrink]

I have the same problem, it disapears because the ntp source interface Lox command is parsed before the loopback interface is created.

It seems like a bug but i could not find much about it.

[SirEna]

Hi all,

Anyone have an idea when was this bug was discovered? thanks in advance

[Amit Singh]

Last year but no specific dates.This is effecting only the latest releases like 12.4.24 T/T1.