Hi All,
I want to configure my NTP Master to get itself synched with public NTP Server for every 12 hrs. I am using Cisco 6509 switch as a NTP server for my network. Please suggest.
Anil K.
Hi Anil.K
The poll interval is pre-configured and cannot be changed by configurations.The first polling is done at 16 seconds and the next time onwards, the poll interval would be 64 seconds.
NTP configuration in switches is as follows as per the link,
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008010e97e.shtml#ex_ntp
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
