I am working with a Cisco Nexus 3048 using 6.0.1 NX OS, I am unable to get a DHCP Server to issue an address to a DHCP Client via a VLAN they are both part of. Setting up the DHCP access is new to me. Does anyone have the steps needed to allow DHCP on the Nexus 3048 NX OS? From everything I am reading I believe it not passing the DHCP traffic through the switch to allow the server and client to be satisfied. Anyone willing to offer any assistance would be greatly appreciated.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...