Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

NX-OS limit-resouce command

Is a VDC reload required whenever the modification of the resources for a VDC is being done and is it service affecting?

Thanks!

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

NX-OS limit-resouce command

Hi,

If you change interface form one VDC to another, there in no need to reload, but if you change memory allocation, then a reload is required:

The Cisco NX-OS software reserves the minimum limit for the resource. Changing the minimum limit for IPv4 multicast routing map memory takes affect only after a device reload or a stateful supervisor module switchover

more info

http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/virtual_device_context/command/reference/vdc_cmd.pdf

HTH

1 REPLY
VIP Super Bronze

NX-OS limit-resouce command

Hi,

If you change interface form one VDC to another, there in no need to reload, but if you change memory allocation, then a reload is required:

The Cisco NX-OS software reserves the minimum limit for the resource. Changing the minimum limit for IPv4 multicast routing map memory takes affect only after a device reload or a stateful supervisor module switchover

more info

http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/virtual_device_context/command/reference/vdc_cmd.pdf

HTH

165
Views
0
Helpful
1
Replies
CreatePlease to create content