Im getting trouble finding out what is missing in my configuration of SVI in our Nexus 7000 Series Core Switch, i wanted to force internet traffic to one of my firewall and it solves while issuing command on SVI ip policy route-map name, but apparently when i try to relase and renew dhcp lease of my pc i got bad ip address and not getting the correct ip.
Cisco Nexus Operating System (NX-OS) SoftwareSoftware BIOS: version 3.22.0 kickstart: version 6.0(4) system: version 6.0(4) BIOS compile time: 02/20/10 kickstart image file is: bootflash:///n7000-s1-kickstart.6.0.4.bin kickstart compile time: 12/25/2020 12:00:00 [06/23/2012 03:26:16] system image file is: bootflash:///n7000-s1-dk184.108.40.206.bin system compile time: 6/6/2012 18:00:00 [06/23/2012 05:03:20]
ip prefix-list TECH: 1 entries seq 10 permit 172.18.161.0/24 le 32
route-map Tech, permit, sequence 10 Match clauses: ip address prefix-lists: TECH Set clauses: ip default next-hop 172.18.100.13
interface Vlan161 ip address 172.18.161.1/24 ip router eigrp HQ ip pim sparse-mode ip igmp version 3 ip policy route-map Tech ip dhcp relay address 172.18.104.60 description [Tech] no shutdown
We are pleased to announce availability of Beta software for 16.6.3. 16.6.3 will be the second rebuild on the 16.6 release train targeted towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are looking for early feedback from custome...