cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
514
Views
4
Helpful
4
Replies

OC-12 WAN service module in Cat 6509-E

fawad.alam
Level 1
Level 1

In which slot should I insert WAN module in Cat 6509-E? I could not find any relevant document on it.

cheers~

fawad

4 Replies 4

Fawad, can you let me know the part number you are referring to so that it becomes easier to understand.

-> sushil

Edison Ortiz
Hall of Fame
Hall of Fame

Fawad,

For OC-12, you need the SIP-400 module

http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8027c9e6.html

It's just like a line card, it can be inserted anywhere in the chassis except on slot 5 and 6 (Supervisor Slots).

Once you have the SIP-400, then you need the SPA,

http://www.cisco.com/en/US/prod/collateral/modules/ps6267/product_data_sheet0900aecd8027cba7.html

HTH,

__

Edison.

Please rate helpful posts

hi Edison,

Thanks for your response. I have inserted the SIP-400 and the SPA in slot 4. Below is the output of "sh module". SPA is in slot 0. The lights are green. I think it is fine..

What do you think?

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

2 8 8 port 1000mb GBIC Enhanced QoS WS-X6408A-GBIC SAD04270HWG

3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL114245CC

4 0 4-subslot SPA Interface Processor-400 7600-SIP-400 JAE12078L26

5 2 Supervisor Engine 720 (Active) WS-SUP720-3B SAL11456EFD

8 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL09337H8U

Mod MAC addresses Hw Fw Sw Sta------------ -------

2 00d0.d3a5.a7d1 to 00d0.d3a5.a7d8 1.3 5.4(2) 8.5(0.46)RFW Ok

3 001d.a2f0.b410 to 001d.a2f0.b43f 2.6 12.2(14r)S5 12.2(18)SXF1 Ok

4 001e.f717.a380 to 001e.f717.a3ff 2.5 12.2(18)SXF1 12.2(18)SXF1 Ok

5 001a.2f3c.7924 to 001a.2f3c.7927 5.4 8.4(2) 12.2(18)SXF1 Ok

8 0014.f2f9.963c to 0014.f2f9.966b 2.3 12.2(14r)S5 12.2(18)SXF1 Ok

Mod Sub-Module Model Serial Hw Status

---- --------------------------- ------------------ ----------- ------- -------

3 Distributed Forwarding Card WS-F6700-DFC3B SAL11477AUB 4.6 Ok

4.0 Ok

5 Policy Feature Card 3 WS-F6K-PFC3B SAL1145686H 2.3 Ok

5 MSFC3 Daughterboard WS-SUP720 SAL11456EV4 3.0 Ok

8 Centralized Forwarding Card WS-F6700-CFC SAL09316GT9 2.0 Ok

-

Mod Online Diag Status

---- -------------------

2 Pass

3 Pass

4 Pass

4/0 Not Applicable

5 Pass

8 Pass

Yup, it looks good.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card