cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
303
Views
0
Helpful
2
Replies

Odd broadcast segment behavior

We have a network management station on the 10.9.8.x/24 segment. This segment lives via HSRP on two 6500 switches. Whenever an end host attempts to connect to the station, they fail. Looking at the ICMP response time, we receive a constant 29-32ms response time 99% of the time. Very sporadically, the response time will reduce to 1ms, at which time we are able to connect to the management station from the workstation on the same segment.

Connectivity to the mgmt station from a host on any other segment is successful 100% of the time.

Thoughts? Thanks.

2 Replies 2

Mahesh Gohil
Level 7
Level 7

Hello,

Providing topology info. of station and hosts + tracert + routing info from switch will be helpful

to know the reason of failure

Regards

Mahesh

Physical Layout

Workstation -> 3550 -> 6500x2 via HSRP -> 3550 -> net-mgmt station

Traceroute from 10.9.8.20/24 to 10.9.8.7/24

C:\>tracert 10.9.8.7

Tracing route to 10.9.8.7
over a maximum of 30 hops:

  1    39 ms    39 ms    53 ms  10.9.8.7

Trace complete.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco