We have two offices in same location withing 120 mt distance. both the location is having already established network router and switches. i need to connect both the offices. could you please suggest me solution for this. we need to extend the network at layer2 and other office will have access to internet and local servers and bandwidth requirement 1 Mbps.
As metioned by that the locations are already having the network i would suggest you to pull a fiber cable and connect the switches at the each end.If they are the part of the same network define the ports which we r using for connections as trunk ports.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...