Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

OID CardIndex Number Changes on WS-C650X

Hi,

I've got a WS-C6504-E running following hardware:

1     SUP720-3B

2     WS-X6148A-GE-TX

3     WS-X6516A-GBIC

4     EMPTY

----------------------------------------------------------------------

IOS Tested:

s72033-advipservicesk9_wan_mz.122-18.SXF6.bin

s72033-adventerprise_wan-mz.122-33.SXI4a.bin

----------------------------------------------------------------------

I boot up the 650X with the following hardware installed:

1     SUP720-3B

2     WS-X6148A-GE-TX

----------------------------------------------------------------------

and after boot up i check following OID via GET-IF Tool:     .1.3.6.1.4.1.9.3.6.11.1.3     (cardDescr)

I get following output:

enterprises.9.3.6.11.1.3.5     :     Supervisor Engine 720

enterprises.9.3.6.11.1.3.6     :     Policy Feature Card 3

enterprises.9.3.6.11.1.3.7     :     MSFC3 Daughterboard

enterprises.9.3.6.11.1.3.8     :     48-port 10/100/1000 RJ45 EtherModule

----------------------------------------------------------------------

After inserting the WS-X6516A-GBIC in Module 3 it looks as following:

enterprises.9.3.6.11.1.3.5     :     Supervisor Engine 720

enterprises.9.3.6.11.1.3.6     :     Policy Feature Card 3

enterprises.9.3.6.11.1.3.7     :     MSFC3 Daughterboard

enterprises.9.3.6.11.1.3.8     :     48-port 10/100/1000 RJ45 EtherModule     IS STILL THE SAME

enterprises.9.3.6.11.1.3.9     :     SFM-capable 16 port 1000mb GBIC           new inserted

----------------------------------------------------------------------

Now i reload the WS-C6504 with the WS-X6148A-GE-TX within Module 3

After the Reload the Index look as following:

enterprises.9.3.6.11.1.3.5     :     Supervisor Engine 720

enterprises.9.3.6.11.1.3.6     :     Policy Feature Card 3

enterprises.9.3.6.11.1.3.7     :     MSFC3 Daughterboard

enterprises.9.3.6.11.1.3.9     :     48-port 10/100/1000 RJ45 EtherModule     AFTER RELOAD IT CHANGED FROM .8 to .9 !!!

enterprises.9.3.6.11.1.3.10     :     SFM-capable 16 port 1000mb GBIC       IS NOW .10 instead of previous .9 !!

----------------------------------------------------------------------

Now why does the WS-X6148A-GE-TX change its index from .8 to .9 if the WS-X6516A-GBIC is inserted?

Is there anyway of resetting this value from .9 back to .8 via CLi after boot up ?

Thank you.

Everyone's tags (4)
242
Views
0
Helpful
0
Replies
CreatePlease to create content