Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

on EHWIC-1GE-SFP-CU MPLS labled packets are not beeing processed

Hello all,

We have the problem that MPLS labled packets are not beeing processed on EHWIC-1GE-SFP-CU if L3PDU + Shim-Header exceeds 1500 bytes

When we move the config exactely to the onboard Interface Gi0/0 it works withoput any problems.

Connection like this:

(MPLS-Network) --- Cisco7301 Gi0/2.1202 --- (P2P-VPLS-Link) --- Gi0/0/0.1202  Cisco2921

Config like this:

Router#sh run | i ^mpls ldp|path-mtu

mpls ldp explicit-null

mpls ldp  graceful-restart

mpls ldp tcp pak-priority

mpls ldp session  protection

mpls ldp advertise-labels for acl-mpls-ldp-advertise

ip tcp  path-mtu-discovery

mpls ldp router-id Loopback0  force

Router#

Router#sh run int  GigabitEthernet0/0

Building configuration...

Current configuration :  179 bytes

!

interface GigabitEthernet0/0/0

mtu 1532

no ip  address

carrier-delay msec 500

duplex auto

speed auto

media-type  rj45

end

Router#sh run int GigabitEthernet0/0/0.1202

Building  configuration...

Current configuration : 511 bytes

!

interface  GigabitEthernet0/0/0.1202

description CPE Gi0/2.1202

bandwidth 10000

encapsulation  dot1Q 1202

ip address 192.168.1.1 255.255.255.252

no ip proxy-arp

ip  router isis

mpls traffic-eng tunnels

mpls traffic-eng  administrative-weight 9

mpls ip

bfd interval 300 min_rx 300 multiplier  3

isis network point-to-point

isis metric 10000

isis hello-interval  3

isis csnp-interval 10

ip rsvp  bandwidth

end

Router#

Thanks in advance !

Emanuel

1 REPLY
New Member

on EHWIC-1GE-SFP-CU MPLS labled packets are not beeing processed

It is related to : CSCtr66487

Traffic issue beyond 1492 MTU size with MPLS L2VPN Xconnect config

The fix is in 152(2)T

664
Views
0
Helpful
1
Replies
CreatePlease login to create content