Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

One 1721, one primary connection and how to configure the backup one

HI,

I have a 1721 with two wics.. 1wic 4 lan port and the other one is a 1wic adsl.

Both stablish vpn to the same public ip.

Now, default static route is behind the first connection, but if it crashes?

how can I configure the router to route the packect from the first line to the second one if the first fails?

best regars

2 REPLIES
New Member

Re: One 1721, one primary connection and how to configure the ba

If your question is how the second preferred routing is to be done , then use a higher matric towards the ATM interface for the ADSL link. If your question is how to detect the ethernet going down , that will be either by a routing protocol or by tracking some reachable ip which when unreachable the secondary route will be used.

New Member

Re: One 1721, one primary connection and how to configure the ba

Hi,

The router has this configuration:

ip route 0.0.0.0 0.0.0.0 publicIP permanent

The solution will be:

ip route 0.0.0.0 0.0.0.0 publicIP permanent metric 1

ip route 0.0.0.0 0.0.0.0 publicIP permanent

metric 2

????

101
Views
0
Helpful
2
Replies