Hi to all. Sorry, maybe I am in the wrong section. But please i need help. I installed a DVR CAM recorder in a friends house, and i need to open port 2000 for this. it also requires port 8080, which i could open perfectly. I did the same with 2000 and does not work. I am really new to networking and find out with some infos on internet, but there is no one for my router DDR2201. Can somebody plz help with something like step by step for dummies, how i do this, thank you very much
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...