Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

option 43 for dhcp server

I need configure catalyst 3750 as a dhcp server for remote installation (RIS) and quit confused with option43. my installation server is a win2003 server, so, how can I get the hex string for option 43?

Any comments will be appreciated

Thanks in advance

1 REPLY
Cisco Employee

Re: option 43 for dhcp server

Hi Friend,

I believe you want your DHCP server 3750 to return DHCP option 43 in hex string? If yes use the option command unde DHCP config mode and specify the hex string to be returned using hex keyword.

option code [instance number] {ascii string | hex string | ip address}

Switch(dhcp-config)#option 43 ?

ascii Data is an NVT ASCII string

hex Data is a hexadecimal string

instance Specify the option instance

ip Data is one or more IP addresses

Have a look at this link for some DHCP related commands

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipras_r/1rfdhcp.htm#wp1018642

HTH

Ankur

453
Views
0
Helpful
1
Replies
CreatePlease login to create content