I've seen this problem in ASA/PIX and Juniper (not yet in CheckPoint). You need to adjust the firewall default timeout value for inactive session. Different firewall (vendor) different default timeout value.
If you disable them, they will set to default value.
No, don't disable it. If you disable it, it will set to default value. I think its disable by default (and uses all default value). You need to enable and increase the value.
I don't remember seeing a specific setting for Oracle. I did see about 12 or more settings that ICMP, UDP, Connection, SUN RPC, Authentication, SIP, etc..
If you use ASDM, it's located in Configuration + (I think Properties) + Timeout
You need to read and understand the guide for setting the timeout, ASDM comes with an online guide - surely the timeout settings are there. Understanding it will make you find the right setting for Oracle as I said I didn't see a specific settings for Oracle, it might be the "Connection". Don't change all at once.
We had the same issue when we had our old PIX 535 running 6.3.5 In 6.3.5 there was no way to adjust timeout values for specific applications. The only option was to adjust the global default timeout values for tcp sessions. When we upgraded to our ASA5550 platform we were able to setup specific timout values all sessions for our Oracle remote servers. There is a good example on the Cisco web page on how to do this. This can be done through a class-map & policy-map setup.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...