Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

OSPF and mananging static route

Hi all,

I'm in stuck with a very easy question. Topic is how ospf is managing static route. I hav e a static route in a router but it is not able to announce it. Following the scenario  (very easy its only for learning scope)

I have this topology:

OSPF is perfectly running between R3 and R2, only the static route on R2 is not announc ed properly.

R3--------------R2--------------R1

R3 and R2 are running ospf, process 200 area 0

R1 is not running any routing protocol.

The network between R2 and R1 is: 25.25.25.0/24.

The network between R2 and R3 is: 192.168.1.0

Attached to R1 there is a network:55.55.55.0/24.

On R2 I created a static route to achieve the network 55.55.55.0/24:

ip route 55.55.55.0 255.255.255.0 25.25.25.1.

The router R2 has this partial configuration:

router ospf 200

log-adjacency-changes

network 192.168.1.34 0.0.0.0 area 0

network 25.25.25.0 0.0.0.255 area 0

Why R2 is not announce the network 55.55.55.0 to its neighbour R3?

Many thanks!!!

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

OSPF and mananging static route

Hello Fabio,

on R2 add

router ospf 200

redistribute static subnets

static redistribution is not automatic

Hope to help

Giuseppe

2 REPLIES
Hall of Fame Super Silver

OSPF and mananging static route

Hello Fabio,

on R2 add

router ospf 200

redistribute static subnets

static redistribution is not automatic

Hope to help

Giuseppe

New Member

OSPF and mananging static route

Hi Giuseppe,

So far I realized that in my topology R2 is an ASBR so you right, I need to redistribuite the static route.

Thanks.

404
Views
0
Helpful
2
Replies