if all devices are connected in a single broadcast domain / IP subnet as your drawing and your network configuration suggests each router would use the neighbor directly to reach IP subnets behind each router.
The only way to enforce a per neighbor cost that could be useful if two routers advertise the same subnet is to use
ip ospf network poin-to-multipoint non-broadcast
(note cisco proprietary) that would allow to specify per neighbor cost in the router ospf process
However, the best way would be to review design and to implement point-to-point links if possible.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.