Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

OSPF Design with DCI

I am designing a new OSPF network that will combine several sites.  My original plan involved adding all the WAN routers into Area 0 and then either putting each (L3) user switch and each data centre into its own area or creating an Area for each site.

The problem is now that we are looking into also interconnecting our L2 domains in the Datacenters, this breaks my idea.

Has anybody seen a best practice document or design guide that took this into account?  Does it make sense to put all datacentres in one big area for this?

1 REPLY
Hall of Fame Super Blue

Re: OSPF Design with DCI

mmacdonald70 wrote:

I am designing a new OSPF network that will combine several sites.  My original plan involved adding all the WAN routers into Area 0 and then either putting each (L3) user switch and each data centre into its own area or creating an Area for each site.

The problem is now that we are looking into also interconnecting our L2 domains in the Datacenters, this breaks my idea.

Has anybody seen a best practice document or design guide that took this into account?  Does it make sense to put all datacentres in one big area for this?

It's not clear how many sites are not DC sites but could you not simply make the L2 interconnected DCs one area and then still have area 0 as the WAN ? That would seem to be the simplest solution.

Jon

285
Views
0
Helpful
1
Replies
CreatePlease login to create content