I have to entry points to our data center - mpls and b2b (backup). I want the backup b2b to be automated and not manually if the mpls goes down. Ingress from the b2b I have switch running ospf with the firewall and redistributing those routes in eigrp. How can I make the routes coming from the b2b (osfp) less desirable then the mpls routes? The easiest way to do it...Any suggestions? Thanks,
BGP, but is being redistributed to EIGR into our core, and the same case for b2b, ospf redis to eigrp into the core. That's why I need to make the b2b less desirable when the mpls link is up so I don't create asymetric routing. Thanks...
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...