I'm looking on an ABR and see the following below -
Now does this mean that these LSA 3s are being advertised from Area 11 into Area 0? Or are these being advertised from Area 0 into Area 11? I'm a bit confused as to what is being represented here. I guess I'm just used to seeing the type 3 LSAs on an Internal router only and not from ABR perspective.
192.168.240.1 - Is the Router ID of the ABR that I'm pulling this info from.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...