Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

OSPF on two Routers with a 2960 Switch in between

Hi Guys,

How is it possible to set up OSPF on two Routers with a 2960 Switch in between?

I had tried it, but i couldn't see any ospf neighbor

And it would be great to have a solution without a static route.

It looks like this:

Router1 (C4506) ------ Switch (2960G) ----- Router 2 (C3750G)

Thanks for your answers.

  • LAN Switching and Routing
Everyone's tags (1)
1 REPLY
Hall of Fame Super Blue

Re: OSPF on two Routers with a 2960 Switch in between

manuelsch wrote:

Hi Guys,

How is it possible to set up OSPF on two Routers with a 2960 Switch in between?

I had tried it, but i couldn't see any ospf neighbor

And it would be great to have a solution without a static route.

It looks like this:

Router1 (C4506) ------ Switch (2960G) ----- Router 2 (C3750G)

Thanks for your answers.

It shouldn't matter if there is a L2 switch in between.

The connections from the 4506 to the 2960 and the 3750G to the 2960G must either be -

1) in the same vlan

or

2) be trunk connections

Jon

1303
Views
5
Helpful
1
Replies
This widget could not be displayed.