Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

OSPF over Link Agg LACP / Port-Channel

We have a cisco 6509 with a 1gb link to an ASR1004 utilizing OSPF.  This link is heavily congested and we would like to link agg or port channel another 1gb link.  Are there any caveats with OSPF on LACP? Will BFD need to be disabled? 

 

I've attached the two interface configs from both 6509 and ASR.

6509

!
interface GigabitEthernet4/45
 description ASR1004A
 ip address 10.254.254.14 255.255.255.252
 ip nat outside
 ip ospf bfd
 bfd interval 150 min_rx 150 multiplier 3
end

 

ASR

!
interface GigabitEthernet1/0/2
 description gw6509-1
 ip address 10.254.254.13 255.255.255.252
 ip ospf bfd
 load-interval 30
 negotiation auto
 bfd interval 150 min_rx 150 multiplier 3
end

Thanks in advance

Rob

Everyone's tags (3)
331
Views
0
Helpful
0
Replies